The so-called food-grade lubricants refer to those that can be applied to lubricate processing machinery in industries such as food, medicine, and cosmetics. For modern food processing enterprises, as lubricants are prone to come into contact with food, they must not only serve the purpose of lubricating and protecting machines against corrosion but also ensure their own edibility and safety. Ordinary industrial lubricants contain high levels of polycyclic aromatic hydrocarbons and 3,4-benzopyrene, which are second only to aflatoxin in terms of carcinogenicity. Therefore, these oils are not allowed to be used as lubricants in the food processing industry. In the spirit of being responsible to consumers and the public, food manufacturers should use lubricants that meet food-grade hygiene requirements during the production process.
Laws and regulations have imposed higher requirements on food-grade lubricants
Since its establishment in 1962, the United States Department of Agriculture/Food Safety and Inspection Service (USDA/FSIS) has been committed to investigating the maintenance regulations and chemical operations of public meat and poultry processing enterprises, ensuring that such enterprises operate under the supervision of the USDA. To strengthen supervision, USDA/FSIS issued the "List of All Substances and Non-Food Compounds" (also known as the "Prior Approval Program"), which has since become the sole authoritative resource for food-grade and non-food-grade lubricants used in food and beverage production worldwide. The list categorizes lubricants into four levels: USDA H-1, USDA H-2, USDA H-3, and USDA P-1. Among them, only USDA H-1 lubricants are authorized by the USDA for use in equipment where there is a risk of accidental contact between food and lubricants. The various classification methods for lubricants by the USDA and FSIS are based on Title 21 of the Code of Federal Regulations of the Food and Drug Administration (FDA). Title 21 of the FDA regulations includes five provisions related to the composition of lubricants that may come into accidental contact with food (please refer to Figure 1 for details).
FDA codes (CFR) related to lubricants that occasionally come into contact with food (Figure A))
|
21.CFR 178-3570 |
The formula for producing H-1 lubricant must comply with this regulation. All products of the Lubriplate H-1 grade comply with this regulation. |
|
21.CFR 178-3620 |
Special mineral white oil, used as a component of non-edible products that come into contact with food. The FMO series products meet this requirement. |
|
21.CFR 172-878 |
The mineral white oil specified in the United States Pharmacopeia (USP) is intended for direct contact with food. The Lubriplate FMO series products from Wittig meet this requirement. |
|
All mineral oils used in the Lubrplate H-1 grade products from Wittig are sourced from the United States Pharmacopeia (USP) mineral white oil. This is the purest and highest quality mineral oil base oil, which can be used by any manufacturer to produce H-1 grade lubricants. |
|
|
21.CFR 172.-882 |
Synthetic isoparaffins, also known as polyalphaolefin (PAO) base oils, are produced. The Lubriplate SFGO Ultra series, SFL series, and SYNXTREME FG series products from Vistex meet this requirement. |
|
21.CFR 182(It includes 9 sub-items) |
Substances commonly considered safe, such as zinc oxide and vitamin E |
The pre-approval process for all substances and non-food compounds conducted by the U.S. Department of Agriculture/Food Safety and Inspection Service is highly effective. It has played a crucial role in protecting consumers from lubricant contamination in the food and beverages they purchase.
In February 1998, the U.S. Department of Agriculture/Food Safety and Inspection Service announced in an official notice published in the Federal Register that it would replace the "prior approval process" with the "Hazard Analysis and Critical Control Point (HACCP) system". Under the HACCP system, biological hazards, chemical hazards, and physical hazards are considered key monitoring points by food and beverage processing companies. Among these hazards, lubricants, as a type of chemical hazard, are subject to stringent regulation by the U.S. Food and Drug Administration (FDA) and the U.S. Department of Agriculture. Simultaneously, the abolition of the U.S. Department of Agriculture's "prior approval process" will save lubricant manufacturers approximately $150,000 to $187,000 in administrative costs, meaning that manufacturers will no longer need to pay any fees to the U.S. Department of Agriculture for potential product authorization and certification.
In the HACCP system, it is crucial for lubricants to meet the FDA food-grade ingredient standards. If food and beverage processing plants use only USDA H-1 food-grade lubricants, there is no need to conduct hazard analysis and regulation for lubricants as potential chemical hazards. Additionally, the US Department of Agriculture/Food Safety and Inspection Service advises users of food-grade lubricants to first review the "certification" provided by the supplier for food-grade products when selecting lubricants, to ensure that their products comply with the relevant requirements of FDA Title 21 regulations.
Currently, the best way for manufacturers to prove that their lubricants comply with FDA Title 21 regulations is to obtain registration from the National Sanitation Foundation (NSF), an internationally recognized, non-profit consumer product monitoring organization. Once a product is certified and registered, lubricant manufacturers can use the "NSF-Certified" logo in their promotional materials and commercial posters. In addition, NSF will continue to monitor specified products and formulations. In the USDA/FSIS system, if lubricant manufacturers change/improve their lubricant formulations, they are required to resubmit them to NSF for certification. At the same time, as companies need to pay a certain fee to NSF during the certification process, product producers will not submit products randomly, but rather products with stable performance and safe formulations. Consumers can easily obtain a list of all NSF-certified lubricants and chemicals by visiting the relevant website (www.nsf.org/usda/listings.asp). It is with the strong guarantee of these measures that food-grade lubricants certified by the National Sanitation Foundation can be safely used in food production processes.
H-1/Food-grade lubricants meet legal and market requirements
In the long run, the sustainable development of H-1/food-grade lubricants is crucial, as they provide essential lubrication protection for food and beverage processing machinery worth thousands of dollars. Food lubricants include food-grade lubricating oils, food-grade lubricating greases, etc. Both petroleum-based and synthetic oil-based lubricants can effectively lubricate and protect machines.
H-1/Food-Grade Lubricant, based on petroleum-derived H-1/Food-Grade Lubricant, is developed from white mineral oil technology and United States Pharmacopeia (USP) grade mineral white oil. USP grade mineral white oil surpasses other white mineral oil products in terms of purity, oxidative stability, and lubricity. The U.S. Food and Drug Administration (FDA) has designated it as an ingredient to be added to formulations to enhance the anti-wear, anti-oxidation, rust-proof, and anti-corrosion properties of lubricants.
Synthetic H-1/food-grade lubricants currently primarily utilize polyalphaolefin (PAO)-based fluids, which exhibit superior oxidation stability compared to mineral-based H-1/food-grade lubricants, as well as notable low-temperature performance. By combining with food-grade additives, PAO-based food-grade H-1 lubricants provide excellent lubrication protection for air compressors, circulating oil systems, hydraulic systems, and gear reducers. It is worth noting that the performance of food-grade H-1 lubricants based on 100% PAO is significantly better than that of base oils composed of PAO and semi-synthetic fluids. Additionally, lubricants based on 100% PAO have a longer service life in equipment, thus justifying their initially higher cost.
For lubricants used on gears, chains, reducers, and other equipment operating between 400℉/201℃ and 600℉/316℃, polyalkylene glycol-based H-1/food-grade synthetic lubricants are also excellent choices.
H-1/food-grade lubricating grease, which is currently commonly made by blending mineral-based or synthetic base oils with complex aluminum-based thickeners, not only has good shear stability but also excellent high-temperature resistance and water resistance. These properties are crucial for food and beverage processing equipment, as these devices often require cleaning.
Currently, NSF H-1/food-grade lubricating grease has evolved to incorporate a thickener of negatively charged calcium sulfonate combined with titanium dioxide as an anti-wear protective additive, as well as poly-alpha-olefin (PAO) as the base of the lubricating grease.
In the development of food-grade lubricant technology, the most crucial aspect is that H-1 grade food-grade lubricants can meet the lubrication needs of various mechanical equipment in food and beverage processing plants. Food-grade lubricants are beneficial not only for businesses but also for the health of employees in food and beverage processing plants. More importantly, the use of H-1 grade food-grade lubricants by food processing and production enterprises not only provides greater protection for consumers but is also crucial for safeguarding the brand image and position of food and beverage production enterprises.